ADC
1.ALFA PROBE #3 USED ONLY FOR FAC FOR AOA PROTECTION AND ALFA TRIM
2.2 STBY ASI AND ONE STBY ALTEMETER
3.A/S SHOWN ON PFD AND TAS AND GS ON ND WHEN >100KT
4.TAT SHOWN ON L/H ECAM AND TRP FROM TCC
5.THERE ARE 2 TAT PROBE TO ADC’S
6.IF TCC’S FAIL ADC CAN SEND TAT TO TRP
7.SAT SHOWN IN CRUISE PAGE
8.BARO REF ON ALTEMETER SENT TO ADC’S AND CPC’S BUT STD(STANDARD) GOES TO FWC,FCC AND SGU’S
9.MACH <0.5 ON PFD SHOWN BY ---
10.ADC#1 IN 96VU AND #2 IN 86VU
11.STBY AND CAPT PITOT PROBES ARE IN L/H BUT STATIC PROBE CAPT HAS BOTH ON L/H AND R/H ALSO F/O AND STBY
12.THERE ARE 2 TAT PROBE GOES TO ADC’S
13.TCC#1 AND SGU#1 GET TAT DATA FROM BOTH ADC
14.STBY STATIC PROBE CONNECTED TO PRESSURIZED SYS
15.STALL WARN INHIB ON GND EXCEPT TEST
16.AOA SENT TO SFCC FOR ALFA LOCK WHEN AOA>9DEG SLAT RET INHIB
17.EGPWS GET A/S SIG FROM ADC#1
18.ADC TEST DONE FROM MTP OR FRONT FACE OF UNIT
19.DURING TEST OVER SPD CAN BE TEST BY INHIB OVRD SW ON ECAM MTP
No comments:
Post a Comment